BLAUDIECK® Hose Coupling System
The Ideal Swaged Coupling for the Beverage and Foodstuffs Industries
BLAUDIECK® Hose Coupling System
Marking:
- BLAUDIECK DN 50 x 8 – 1.4301
Application:
On request, ContiTech Schlauch GmbH supplies any desired hose length – with or without steel-wire helix – pre-fitted with the Blaudieck® hose coupling system. In the brewing, beverage and foodstuff industry, this system is a favored standard when an ultra-hygienic hose line is required which enables smooth media flow in the coupling area without any dead space and which can be easily cleaned mechanically (piggable). The high pressure resistance of the couplings helps prevent industrial accidents. The material 1.4301 is used as a standard; other materials on request.
Description:
- Suitable for a broad range of applications in the brewing,
beverage and foodstuff industry - Smooth and hygienically clean connection, without any transition
between hose lining and coupling - Hose end sealed tightly (no wicking effect)
- Resistance to pull-off forces at operating pressure
- No damage to the inner lining caused by the fitting process
- No change to cross-section in the coupling area
- Piggable
- Protective rubber rings available in blue
On request we deliver the following coupling types:
| Special Types of Couplings | ||
|---|---|---|
| DIN 11851 | standard | milk pipe thread |
| DIN 11864-1 | aseptic | |
| ISO 2853 | IDF | international |
| BS 4825 | RJT | british standart |
| SMS 1145 | SMS | swedish standart |
| DS 722 | DS | danish standart |
| execution inch | clamp | international, identical with DIN 32676, difference: diameter of sealing ring |
Technical Data:
- BLAUDIECK® hose coupling systems are available for the following hose sizes
| Hose Sizes | ||
|---|---|---|
| Nominal width / Wall thickness in mm | 25/6, 32/6, 32/8, 40/7, 40/9, 50/8, 50/10, 65/8, 65/12, 75/8, 75/12, 80/8, 80/14, 100/9, 100/15 | |
